Photography by: Graham MacNeil Ford really wants to sell you a Mustang with a turbo four cylinder. They started by derating the V6 engine in the 2015 S550 compared to the 2011-2014 S197 V6 to make the EcoBoost 2.3 litre more differentiated. Then, they offered a performance pack on the EcoBoost but not on the V6. Now, they killed the V6 all together for 2018 and will only sell you a V8 or this EcoBoost. I love a good V8, everyone who knows me knows that. This is a Mustang, which means it needs a V8. If those aren't enough reasons, I always prefer natural aspiration over forced induction. That's three strikes against the EcoBoost-powered Mustang. But I'd be lying if I said the idea never intrigued me. It's the lightest (if you account for features). It has the best weight distribution. It has the same great chassis as the GT. It's very affordable and it has a lot of potential to make more power. Aftermarket? Endless support. There's plenty of good about it.
If you've had any doubts about whether or not they will fit, fear not! You absolutely can run square 305/30/19's. I had a lot of doubts before pulling the trigger, even more so when the wheels where on the car. The tires do poke out a bit and I figured rubbing is all but guaranteed at full compression but I couldn't be happier I trusted APEX and those on here who have run it. Here's what you need: 1. Camber plates: I have MM C/C plates and they are maxed out at -2.3 deg with the stock struts. I have been running them for years with many track days without issue. 2. 1"/25 mm spacer: I have Motorsport-tech 1" spacers and they look like high quality units. There is maybe a 1/4 inch clearance in the back so you can't go any narrower than 25 mm. http://www.motorsport-tech.com/adaptec/car/ford_s and you want Design 2. Motorsport Tech 1" Mustang Hub-centric Spacers 3. Elongated studs: your best bet is to get the FPP hubs with elongated studs