Skip to main content
HOME   |   ABOUT   |   NEWS   |   TECH ARTICLES   |   AT THE TRACK   |   REVIEWS   |   VIDEOS   |   CONTACT ME

Disappointing BMW M4 Start-up and Rev




This is the new BMW M4 which is powered by a twin-turbo 3-litre straight six making 425 hp and 406 lb-ft of torque which is 11 hp and 111 lb-ft of torque. While that is a healthy upgrade, specially the increase in torque, the engine noise is rather disappointing.. Below is a video showing a 2015 BMW M4 start up and rev.




You can actually hear someone in the background saying that it sounds like a Prius. Many diehard M3 fans and auto enthusiasts in general were bemoaning the switch to a turbo engine and now there's another disappointment, the engine noise. If you have a laptop, I recommend plugging in good speakers, preferably with a woofer, or at least head phones because laptop speakers will make it terrible.

This is the new BMW M4 which is powered by a twin-turbo 3-litre straight six making 425 hp and 406 lb-ft of torque which is 11 hp and 111 lb-ft of torque. While that is a healthy upgrade, specially the increase in torque, the engine noise is rather disappointing.. You can actually hear someone in the background saying that it sounds like a Prius. Many diehard M3 fans and auto enthusiasts in general were bemoaning the switch to a turbo engine and now there's another disappointment, the engine noise. If you have a laptop, I recommend plugging in good speakers, preferably with a woofer, or at least head phones because laptop speakers will make it terrible.




While no one expects this to sound like the last generation M3 with the free revving V8 (video above), I was expecting it to sound as good as the E46 M3 with possibly a bit of muffling due to the turbo. That's not the case though, as you can see from the video below.. What do you think? Do you think the new F82 M4 (and the M3 since they have the same engine/drivetrain)




Comments

Post a Comment







Does An Aftermarket Grille Really Increase Airflow?
I put a Saleen S281 grille to the test to answer that question.

Stock Suspension S197 Mustang With Square 305/30/19's
What you need to fit a proper size square tire setup.

How Limited Slip Diffs Make You Faster on Track
What you need to know about how they put power down and pros and cons.

Can Telemetry Explain Schumacher's Talent?
A comparison between Schumacher's and then team mate Herbert's data.






Cayman GT4 Track Review
The first Cayman with proper (911-challenging) power.

Is an EcoBoost Mustang any good on Track?
Two days at the track in a Mustang short 4 cylinders.

2016 BMW M4 DCT Track Review
It's quick (properly quick). But is it fun?

Can a stock Golf Diesel handle a Track Day?
Not your every day track beater.




🔥 Most Visited This Week

Michelin Pilot Super Sports vs Firestone Firehawk Indy 500 - Street Review

I've been a huge fan of Michelin PSS tires and exclusively bought them for the Mustang over the last four years. So how did I end up here? This year, I was hugely interested in trying an "R-comp" tire. I had my eyes set on Bridgestone Potenza RE-71R's for two simple reasons: price and reputation. Although not a true "R-comp" tire on paper, it performs like one by the account of every single test and review I've read (down to wear rates...). They seem like they're easily the most affordable (from a big brand) R-comp tire and combine that with a reputation for having tons of grip, it was an easy top contender. I had my concerns, though. For one, I'm told and have read that they are an autox tire, not really designed for high speed, pressure, and temps associated with open track. For another, the Mustang is a heavy car (as far as track cars are concerned) being roughly 3,800 lb. (including driver), which will amplify the unwanted open track loads.…

Michelin PSS vs Firestone Indy 500 - Track Review

A couple of weeks ago, I posted my first impressions of Michelin's PSS vs Firestone Firehawk Indy 500 tires. I've run PSS's for several years on the Boss, but I'm trying the Indy 500's for the first time. In short, I was worried about the narrower tires (I was running 285/35/18 PSS but could only find the Indy 500 in 275/35/18) and tread squirm, but I was happy with them up to that point just driving on the street. I had the chance to drive on them for three track days now. So what were they like? After my first session, they made an impression that basically persisted for the rest of track sessions on them. Phenomenal, unmatched value. Now, if value is something that stands out above all else, it typically means the compromise between qualities you want and those you don't is less than ideal, but the value is attractive. This is no different. I'll start with the bad, which really boil down to two: ultimate grip and grip longevity.

Grip is noticeably lowe…

The Truth behind Owning a Modified Ferrari 458 Italia

After driving and reviewing this modified 620 hp Ferrari 458 Italia, I talk to the owner to find out the truth behind owning and living with a modern Ferrari. This isn't a garage queen Ferrari either, it serves double duty as an every day car and track car. Watch to find out ownership costs, reliability, and experience. Interested in joining Scott at the track? Check out MHPDC.

Liked this? Make sure to subscribe so you don't miss new videos!



Follow Rams Eye The Track Guy on Facebook and Instagram!






View this post on Instagram
A post shared by Michael R (@ramseyethetrackguy) on May 21, 2019 at 5:17pm PDT

Stock Suspension S197 Mustang With Square 305/30/19's

If you've had any doubts about whether or not they will fit, fear not! You absolutely can run square 305/30/19's. I had a lot of doubts before pulling the trigger, even more so when the wheels where on the car. The tires do poke out a bit and I figured rubbing is all but guaranteed at full compression but I couldn't be happier I trusted APEX and those on here who have run it.

Here's what you need:

1. Camber plates: I have MM C/C plates and they are maxed out at -2.3 deg with the stock struts. I have been running them for years with many track days without issue.

2. 1"/25 mm spacer: I have Motorsport-tech 1" spacers and they look like high quality units. There is maybe a 1/4 inch clearance in the back so you can't go any narrower than 25 mm. http://www.motorsport-tech.com/adaptec/car/ford_s and you want Design 2.


3. Elongated studs: your best bet is to get the FPP hubs with elongated studs instead of reusing the old one. Bearings are consumables anyway so…