Rams Eye The Track Guy

Last year, I picked up a 2009 Lancer Ralliart to do a long term test with it as a dual duty track/daily. One of the first things I knew I was going to do was put a decent set of tires on it. The car came without OEM wheels which was actually good because I didn't have to hesitate about getting a good set of aftermarket wheels to support going wider. Thankfully, my friends at YST Auto Halifax  set me up with a great set of Superspeed RF03RR wheels. The Wheels I had never even heard of Superspeed but I trusted the good folk at YST Auto who mentioned some customer cars running on track with them. These wheels are rotary forged which is basically a prerequisite to be taken seriously in this market populated by companies like TSW and Fast Wheels. The wheels looked like a high quality, well finished wheel and each had a "QC" check sticker on. Just for appearances? Maybe, but I found no defects. The wheels seemed easy to balance (didn't need many weights) and at 18.1 lb. f

BMW M2 equipped with an eLSD - BMW © A few weeks ago, I posted about traditional clutch-type limited slip diffs (LSD's) and how they work. You can read about those in the previous post: How Limited Slip Diffs Make You Faster on Track . But as you might know or have learned from reading the article, they aren't without their faults, which means engineers are always working to get around those limitations. You may not be surprised to learn that something like the Ferrari 488 GTB doesn't use a traditional limited slip diff, but it's not limited to super cars, far from it. Cars like the Golf GTI, the Civic Type R, various Mustangs, Corvettes, and BMW M cars, and even the Lexus RC F and GS F, all avoid a traditional limited slip diff in favour of one of these technologies. To keep things simple, I'll focus on two wheel drive vehicles. The vast (vast) majority of principles apply to all and 4 wheel drive vehicles, but there are some subtle differences that I'll

C7 Corvette Grand Sport... doing a burnout with a proper diff - Graham MacNeil  © I wrote a tech post comparing various open and limited slip diffs for a comparison and I found that a lot of people were asking questions. To simplify and make it easier to read, I decide to break them up for a future tech article about handling. Make sure to stay tuned for two posts on limited slip diffs this week!. WHY DO YOU EVEN NEED A DIFFERENTIAL? A differential's job is to allow two wheels on the same axle (or two axles in a 4WD drivetrain) to spin at different speeds so a car could smoothly go around a corner. Why do the wheels need to spin at different speeds? Each wheel on a car has to travel a different path to reach the end of the turn. You can see that for yourself every time you drive on snow covered roads or muddy trails. Four different tracks by four wheels/tires on one car going around a turn - Rams Eye The Track Guy  © If you take a turn, you'll see that each whee

Meet Juns Subaru BRZ. If the traditional power adding methods like forced induction or dropping a small block V8 aren't your thing, this may be it (although I imagine swapping a small block V8 into something small is typically a North American - and awesome - solution, but I digress). This one does have a V8 but it's a very different kind of V8 and, at $70,000, it will cost you a multiple of that but you will no doubt have something very unique. The engine is based on two Kawasaki Ninja ZX-12R engines and has a displacement of 2.4 litres. Power? 356 hp at 10,680 rpm, a whopping 156 hp over stock, although torque gets a much more modest jump to 199 lb-ft, "only" 48 lb-ft over stock. This frankenstein engine is the work of Synery Power in New Zealand, which developed the engine for midget car speedway racing but they have wanted to put it in a street car. I would imagine the experience might be similar to a rotary engine, making a lot of power but all very h