Skip to main content
HOME   |   ABOUT   |   NEWS   |   TECH ARTICLES   |   AT THE TRACK   |   REVIEWS   |   VIDEOS   |   CONTACT ME

Watch the 2020 C8 Mid-engine Corvette Reveal


The day is finally here! There have been rumours about a mid-engine Corvette being just around the corner for decades. And over the years, there has been no shortage of mid-engine Corvette concepts either, as if Chevy just wanted to keep the rumours going. This time, it's for real, though. Too much evidence of its existence including test mules and spy shots at the Nurburgring meant it was finally coming for sure.

Last year, I wrote about what we can expect to find on a mid-engine Corvette and when it may be revealed. Although I was off in my prediction of when it will be revealed (and in my defence, it was actually intended to be revealed when I predicted by a supplier issue delayed the reveal), earlier this year, Chevy confirmed that a mid-engine is coming and went as far as announcing the day of its reveal on the side of one of its test mule. That day is today, and if you're sitting at the edge of your seat, you aren't alone.

Wondering how to stay up to date and watch it live? You can watch it right here:


Follow Rams Eye The Track Guy on Facebook and Instagram!





Comments







Does An Aftermarket Grille Really Increase Airflow?
I put a Saleen S281 grille to the test to answer that question.

Stock Suspension S197 Mustang With Square 305/30/19's
What you need to fit a proper size square tire setup.

How Limited Slip Diffs Make You Faster on Track
What you need to know about how they put power down and pros and cons.

Can Telemetry Explain Schumacher's Talent?
A comparison between Schumacher's and then team mate Herbert's data.






Cayman GT4 Track Review
The first Cayman with proper (911-challenging) power.

Is an EcoBoost Mustang any good on Track?
Two days at the track in a Mustang short 4 cylinders.

2016 BMW M4 DCT Track Review
It's quick (properly quick). But is it fun?

Can a stock Golf Diesel handle a Track Day?
Not your every day track beater.




🔥 Most Visited This Week

Michelin Pilot Super Sports vs Firestone Firehawk Indy 500 - Street Review

I've been a huge fan of Michelin PSS tires and exclusively bought them for the Mustang over the last four years. So how did I end up here? This year, I was hugely interested in trying an "R-comp" tire. I had my eyes set on Bridgestone Potenza RE-71R's for two simple reasons: price and reputation. Although not a true "R-comp" tire on paper, it performs like one by the account of every single test and review I've read (down to wear rates...). They seem like they're easily the most affordable (from a big brand) R-comp tire and combine that with a reputation for having tons of grip, it was an easy top contender. I had my concerns, though. For one, I'm told and have read that they are an autox tire, not really designed for high speed, pressure, and temps associated with open track. For another, the Mustang is a heavy car (as far as track cars are concerned) being roughly 3,800 lb. (including driver), which will amplify the unwanted open track loads.…

Stock Suspension S197 Mustang With Square 305/30/19's

If you've had any doubts about whether or not they will fit, fear not! You absolutely can run square 305/30/19's. I had a lot of doubts before pulling the trigger, even more so when the wheels where on the car. The tires do poke out a bit and I figured rubbing is all but guaranteed at full compression but I couldn't be happier I trusted APEX and those on here who have run it.

Here's what you need:

1. Camber plates: I have MM C/C plates and they are maxed out at -2.3 deg with the stock struts. I have been running them for years with many track days without issue.

2. 1"/25 mm spacer: I have Motorsport-tech 1" spacers and they look like high quality units. There is maybe a 1/4 inch clearance in the back so you can't go any narrower than 25 mm. http://www.motorsport-tech.com/adaptec/car/ford_s and you want Design 2.


3. Elongated studs: your best bet is to get the FPP hubs with elongated studs instead of reusing the old one. Bearings are consumables anyway so…

This Lanzante Porsche 930 is powered by a GP-winning F1 Engine

Whenever I hear of an outlandish 911 build, I always wonder what hardcore 911 would think. In my experience, they tend to love tradition and preserving the 911 legacy. This car breaks two of the holy trinity of classic 911's; rear engined, flat-six, and air-cooled. It is still rear engined but it uses a V6, water-cooled engine. But I can't imagine a single 911 fan being upset about this.

You see, this isn't just any water-cooled V6 engine. It is a Formula 1 twin-turbocharged 1.5 litre V6 out of a McLaren MP4/3 F1 car. Further preserving the Porsche-ness of this build, the engine was built by a partnership formed between Porsche and TAG to provide engines for McLaren F1 team. Porsche was responsible for the technical burden of design and engineering and TAG financed the effort and stuck its name on the engine as "TAG turbo" since McLaren didn't want Porsche's name on their F1 car.

Lanzante first revealed the car in October last year shortly after the annu…

Watch The Best Valentine's Day Inspiration: Wife & Husband Track Battle

Wife (R32) vs husband (Mk1 Golf) playing a bit of tag at Atlantic Motorsport Park in Shubie, NS. Both cars are turbocharged, both built by them for them to enjoy on a track. Oh, and the R32 shoots flames on the overrun. Every. Single. Time. This is the best couples bonding activity I've ever seen.



Follow Ram's Eye The Track Guy on Facebook and Instagram!





View this post on Instagram


A post shared by Mike R (@ramseyethetrackguy) on Oct 18, 2018 at 5:03pm PDT