Skip to main content

Posts

Showing posts with the label At The Track
HOME   |   ABOUT   |   NEWS   |   TECH ARTICLES   |   AT THE TRACK   |   REVIEWS   |   VIDEOS   |   CONTACT ME

Bridgestone Potenza RE-71R Track Review

For better or for worse, I have heard and read so much about RE-71R's. Everyone swears by the grip but complains about the wear. Generally speaking, the pros are:

1. They grip as well or better than most R comps.
2. They don't wear as quickly as R comps if driven occasionally on the street.
3. They work better in the rain than R comps.

The cons were limited to overheating quickly when used on track (being an autocross tire) and wearing too fast on heavy cars like mine.

In the popular 200 TW category, they are faster than the popular Hankook RS-4's and BFGoodrich Rival S's according to published Tire Rack Tests. According to plenty of reviews, they are also faster than well established R comps like R888R's (which don't seem to work too well on heavy cars anyway) and the venerable NT01's. But I was still hesitant for a while until I talked to a tire tech support gentleman at Tire Rack who has gone faster on RE-71R's than NT01s. In a Mustang (his own, not…

Stock Suspension S197 Mustang With Square 305/30/19's

If you've had any doubts about whether or not they will fit, fear not! You absolutely can run square 305/30/19's. I had a lot of doubts before pulling the trigger, even more so when the wheels where on the car. The tires do poke out a bit and I figured rubbing is all but guaranteed at full compression but I couldn't be happier I trusted APEX and those on here who have run it.

Here's what you need:

1. Camber plates: I have MM C/C plates and they are maxed out at -2.3 deg with the stock struts. I have been running them for years with many track days without issue.

2. 1"/25 mm spacer: I have Motorsport-tech 1" spacers and they look like high quality units. There is maybe a 1/4 inch clearance in the back so you can't go any narrower than 25 mm. http://www.motorsport-tech.com/adaptec/car/ford_s and you want Design 2.


3. Elongated studs: your best bet is to get the FPP hubs with elongated studs instead of reusing the old one. Bearings are consumables anyway so…

All Mainstream AWD and 4WD Systems Compared and Explained

If you live in Canada or the US, you'll find that plenty of people hold sacred the terms '4x4' and '4WD' to describe a 'true 4x4', where you have a butch transfer case with a low speed, perhaps a body on frame chassis, and ideally a solid axle or two. I'm not sure how that translates to the rest of the world. My extensive research into the motoring industry in Europe (which exclusively consists of watching Top Gear and The Grand Tour...) concluded that most people across the pond simply refer to any vehicle that is capable of sending any power to all four wheels as a 4WD vehicle, further muddying the waters. Where I grew up, 4x4 was more or less synonymous with 'Jeep' so that's not much help either.

However, despite all various systems attempting to do the same sort of thing - distribute power between all four wheels instead of two - not all systems are created equal, with significant differences in some cases. As a primer for a future post…

Interview: eSports Commentator and GT3 Racer Matt 'Sadokist' Trivett

If you aren't at all into gaming and online championships - eSports - you may not know who Sadokist is. In fact, I had no idea who he was when I met him either.  I just saw a "new" E46 M3 GT3 race car at the track that I had never seen before. I'm not exactly a "veteran" of our track - I had only been frequenting the track for about 5 years at the time - but it had been long enough that I recognized most of the regulars and the race cars. It looked like a proper build and the trailer was parked next to the other two local M3 race cars running whose owners I knew very well, so I went to chat and ask about the car.


I learned later that Matt is a bit of an eSports celebrity. You can't argue with Twitter. But you wouldn't know this just talking to him. He's very down to earth, so much so that he simply thanked me when I "welcomed" him to the track... even though he went to his race school as a wee lad 4 years before I even first stepped f…






Does An Aftermarket Grille Really Increase Airflow?
I put a Saleen S281 grille to the test to answer that question.

Stock Suspension S197 Mustang With Square 305/30/19's
What you need to fit a proper size square tire setup.

How Limited Slip Diffs Make You Faster on Track
What you need to know about how they put power down and pros and cons.

Can Telemetry Explain Schumacher's Talent?
A comparison between Schumacher's and then team mate Herbert's data.






Cayman GT4 Track Review
The first Cayman with proper (911-challenging) power.

Is an EcoBoost Mustang any good on Track?
Two days at the track in a Mustang short 4 cylinders.

2016 BMW M4 DCT Track Review
It's quick (properly quick). But is it fun?

Can a stock Golf Diesel handle a Track Day?
Not your every day track beater.




🔥 Most Visited This Week

How would a Mustang 3.5L EcoBoost compare to the 5.0L V8?

Ever wonder how a 3.5 litre EcoBoost might fair against the 5.0 litre V8 in the Mustang? Of course you have. Ever since Ford dropped it in the F150 (and perhaps well before), everyone has been wondering how it would perform. There are basically two camps; those who think it would be awesome because of tuneability and power potential and those who think it means the death of the V8 in the Mustang. If you are in the latter group, we seem to be good so far with continuous upgrades to the 5.0 litre Coyote and the brand new Shelby GT500 which still uses a supercharged V8 as it has been for over a decade and multiple iterations. But what if...

Well, it seems we are closer than ever to finding out the answer to that question. American Trucks recently got together two crew cab, short box, 4x4 F150's but one has the 5.0 litre V8 and the other has the 3.5 litre EcoBoost V6. There has been a few comparisons between 5.0 litre and 3.5 litre EB F150's, but this seems to be the most direct …

The Truth behind Owning a Modified Ferrari 458 Italia

After driving and reviewing this modified 620 hp Ferrari 458 Italia, I talk to the owner to find out the truth behind owning and living with a modern Ferrari. This isn't a garage queen Ferrari either, it serves double duty as an every day car and track car. Watch to find out ownership costs, reliability, and experience. Interested in joining Scott at the track? Check out MHPDC.

Liked this? Make sure to subscribe so you don't miss new videos!



Follow Rams Eye The Track Guy on Facebook and Instagram!






View this post on Instagram
A post shared by Michael R (@ramseyethetrackguy) on May 21, 2019 at 5:17pm PDT

Michelin Pilot Super Sports vs Firestone Firehawk Indy 500 - Street Review

I've been a huge fan of Michelin PSS tires and exclusively bought them for the Mustang over the last four years. So how did I end up here? This year, I was hugely interested in trying an "R-comp" tire. I had my eyes set on Bridgestone Potenza RE-71R's for two simple reasons: price and reputation. Although not a true "R-comp" tire on paper, it performs like one by the account of every single test and review I've read (down to wear rates...). They seem like they're easily the most affordable (from a big brand) R-comp tire and combine that with a reputation for having tons of grip, it was an easy top contender. I had my concerns, though. For one, I'm told and have read that they are an autox tire, not really designed for high speed, pressure, and temps associated with open track. For another, the Mustang is a heavy car (as far as track cars are concerned) being roughly 3,800 lb. (including driver), which will amplify the unwanted open track loads.…

Stock Suspension S197 Mustang With Square 305/30/19's

If you've had any doubts about whether or not they will fit, fear not! You absolutely can run square 305/30/19's. I had a lot of doubts before pulling the trigger, even more so when the wheels where on the car. The tires do poke out a bit and I figured rubbing is all but guaranteed at full compression but I couldn't be happier I trusted APEX and those on here who have run it.

Here's what you need:

1. Camber plates: I have MM C/C plates and they are maxed out at -2.3 deg with the stock struts. I have been running them for years with many track days without issue.

2. 1"/25 mm spacer: I have Motorsport-tech 1" spacers and they look like high quality units. There is maybe a 1/4 inch clearance in the back so you can't go any narrower than 25 mm. http://www.motorsport-tech.com/adaptec/car/ford_s and you want Design 2.


3. Elongated studs: your best bet is to get the FPP hubs with elongated studs instead of reusing the old one. Bearings are consumables anyway so…