Skip to main content
HOME   |   ABOUT   |   NEWS   |   TECH ARTICLES   |   AT THE TRACK   |   REVIEWS   |   VIDEOS   |   CONTACT ME

Toyota Avalon TRD - A Closer Look




One of the most puzzling cars at last year's SEMA show was a boosted Toyota Avalon. Yes, boosted as in relying on more than mother nature to stuff an engine cylinder full of air. The car was sporting a TRD supercharger with an Eaton Gen 6 TVS rotor assembly along with a slew of suspension and appearance modifications. Toyota apparently decided to leave it with the guys at Motor Trend to put through the tests. A couple of days ago, Motor Trend posted their tests and the numbers were.. interesting.




Handling improvements are nothing short of impressive. 6-piston front brake callipers and 4-piston rear ones along with larger, cross drilled rotors help bring the car to a stop from 60 mph in 106 ft, which is sports car territory. Motor Trend was able to record an average lateral acceleration of 0.92 g. To put that into perspective, that puts it right in between two trims of an excellent RWD sedan, the Cadillac ATS. When tested by Motor Trend, the 2.0 litre turbo model was able to pull 0.90 g and and the 3.6 litre V6 model was able to pull 0.94 g. Although, besides the reduction in body movement and roll, driving feel probably hasn't improved much. The improvements were done in an aftermarket fashion though, with stiffer shocks, springs and bushings, not modifying suspension geometry or chassis rigidity so the ride is stiffer and jarring over bumps but that's expected from a SEMA show car.




The same can't be said for the engine department. Although the engine gets a supercharger, power is up by only 52 hp. While 52 hp is a healthy amount of power, the addition of a form of forced induction usually brings a lot more hp to the table, along with a healthy improvement in straight line performance. The Avalon TRD is not quicker than the production Avalon though. It's not even as fast.. it is actually slower. With a 0-60 mph time of 6.5 seconds and a 1/4 mile time of 15.0 seconds, which are 0.3 and 0.4 seconds SLOWER than the production version that does the deeds in 6.3 and 14.6 seconds respectively. Toyota says more work is needed to tune the engine and recalibrate the software and the car is also over 200 lb. heavier because of the additional show kit like stereo and rims.

The weight excuse is frankly just that, an excuse. There are several full size cars that weigh over 4,000 lb., over 300 lb. heavier than this Avalon TRD, which weighs 3,755 lb., and when equipped with naturally aspirated V6 engines with similar displacements and less hp, run the same or better acceleration times. I think Toyota simply didn't do their homework on the engine and just bolted a few bits and pieces along with a supercharger on the engine to make a show car. I checked SEMA's website for information about the car (Toyota Avalon TRD) and it lists detailed information about all modifications so I am assuming no parts are missing. Under "Engine", only the supercharger is listed which means that no changes to fuelling system, internals or other engine components that may benefit from an upgrade to take advantage of forced induction. Even worse, there may be no intercooler.

This seems like it was put-together over a few days. It doesn't seem like one of these cars where a company tells its engineers to go wild with their ideas or showcase their best performance work. It seems like no engineering went into it at all - just a bill for a few good aftermarket parts and a few hours on a hoist. I am very surprised that Toyota decided to drop this car off to be tested and confused as to why Toyota would do that.

Source: Motor Trend, SEMA

Comments

  1. Replies
    1. Toyota never put this into production and just made it as a show car created for SEMA so I don't think you can get one of those. There could be a TRD or aftermarket supercharger kits for their transverse V6 cars like the Camry and Avalon, though, which will likely perform much better than this if it has all the necessary bits to take advantage of boost.

      Delete

Post a Comment







Does An Aftermarket Grille Really Increase Airflow?
I put a Saleen S281 grille to the test to answer that question.

Stock Suspension S197 Mustang With Square 305/30/19's
What you need to fit a proper size square tire setup.

How Limited Slip Diffs Make You Faster on Track
What you need to know about how they put power down and pros and cons.

Can Telemetry Explain Schumacher's Talent?
A comparison between Schumacher's and then team mate Herbert's data.






Cayman GT4 Track Review
The first Cayman with proper (911-challenging) power.

Is an EcoBoost Mustang any good on Track?
Two days at the track in a Mustang short 4 cylinders.

2016 BMW M4 DCT Track Review
It's quick (properly quick). But is it fun?

Can a stock Golf Diesel handle a Track Day?
Not your every day track beater.




🔥 Most Visited This Week

Bridgestone Potenza RE-71R Track Review

2012 Boss 302 on square 305/30/19 RE-71R's at AMP - Graham MacNeil © For better or for worse, I have heard and read so much about RE-71R's. Everyone swears by the grip but complains about the wear. Generally speaking, the pros are: 1. They grip as well or better than most R comps. 2. They don't wear as quickly as R comps if driven occasionally on the street. 3. They work better in the rain than R comps. The cons were limited to overheating quickly when used on track (being an autocross tire) and wearing too fast on heavy cars like mine. In the popular 200 TW category, they are faster than the popular Hankook RS-4's and BFGoodrich Rival S's according to published Tire Rack Tests. According to plenty of reviews, they are also faster than well established R comps like R888R's (which don't seem to work too well on heavy cars anyway) and the venerable NT01's. But I was still hesitant for a while until I talked to a tire tech support gentleman...

Why an Open Differential Doesn't Work on Track

C7 Corvette Grand Sport... doing a burnout with a proper diff - Graham MacNeil  © I wrote a tech post comparing various open and limited slip diffs for a comparison and I found that a lot of people were asking questions. To simplify and make it easier to read, I decide to break them up for a future tech article about handling. Make sure to stay tuned for two posts on limited slip diffs this week!. WHY DO YOU EVEN NEED A DIFFERENTIAL? A differential's job is to allow two wheels on the same axle (or two axles in a 4WD drivetrain) to spin at different speeds so a car could smoothly go around a corner. Why do the wheels need to spin at different speeds? Each wheel on a car has to travel a different path to reach the end of the turn. You can see that for yourself every time you drive on snow covered roads or muddy trails. Four different tracks by four wheels/tires on one car going around a turn - Rams Eye The Track Guy  © If you take a turn, you'll see that each whe...

Michelin Pilot Super Sports vs Firestone Firehawk Indy 500 - Street Review

I've been a huge fan of Michelin PSS tires and exclusively bought them for the Mustang over the last four years. So how did I end up here? This year, I was hugely interested in trying an "R-comp" tire. I had my eyes set on Bridgestone Potenza RE-71R's for two simple reasons: price and reputation. Although not a true "R-comp" tire on paper, it performs like one by the account of every single test and review I've read (down to wear rates...). They seem like they're easily the most affordable (from a big brand) R-comp tire and combine that with a reputation for having tons of grip, it was an easy top contender. I had my concerns, though. For one, I'm told and have read that they are an autox tire, not really designed for high speed, pressure, and temps associated with open track. For another, the Mustang is a heavy car (as far as track cars are concerned) being roughly 3,800 lb. (including driver), which will amplify the unwanted open track load...

The "M5 BMW should have built" - A 700 hp Switzer Tuned BMW M5

The "M5 BMW should have built" is what Switzer, the Ohio-based tuner, is calling their P700 BMW M5. The new F10 BMW M5 is far from lacking in the power department, thanks to a twin turbo 4.4 litre V8 making 560 hp and 500 lb-ft of torque. The numbers don't tell the complete story though - judging by acceleration test numbers compared to similar cars in the segment with comparable hp ratings, power-to-weight ratios and even some dyno tests, the hp rating is probably closer to what the car makes at the wheels rather than the crank, which is what many people have come to expect from BMW engines. That was not enough for the folks at Switzer Performance though, so they made a few modifications to bring the numbers up a little. How much is a little? Well, if Switzer is conservative with their power ratings like BMW, then nearly 140 hp. For $6,995, they will take a stock BMW M5 and turn up the boost with a new engine control unit (ECU), replace the stock exhaust with...