Skip to main content
HOME   |   ABOUT   |   NEWS   |   TECH ARTICLES   |   AT THE TRACK   |   REVIEWS   |   VIDEOS   |   CONTACT ME

Ford Finally Announces HP figure for 2020 GT500



Ford has been teasing the new GT500 for months now and many details are already known about it like specs and even top speed and downforce figures. But the one thing that remained a mystery is the exact horsepower figure. We knew it was going to be over 700 hp, but exactly how much wasn't known. But we FINALLY have an answer now in the form of a video. And what more appropriate way to announce a mad 700+ horsepower figure than a burnout video?


This figure puts it WELL above its primary rivals, namely the Challenger Hellcat with 707 hp and the Camaro ZL1 with 650 hp, but it is still shy of the new Hellcat Redeye with 797 hp, but it should be much lighter, to the tune of 200-300 lb. And while the Challenger Hellcat is a massively capable grand tourer for its size and weight, the GT500 should be in a different league on track, especially with the Track Pack.

Getting that much horsepower makes it the most powerful production Ford ever and the most power and torque dense V8 in the world with 'only' 5.2 litres of displacement. It is also the first Mustang to use a dual-clutch automatic transmission/gearbox. Given the power and all the hardware, this stands to be the most capable Mustang ever made, and one of the most capable cars on sale today. Pricing is still not announced, although MSRP should be reasonable but dealer markup likely won't be...

Follow Ram's Eye The Track Guy on Facebook and Instagram!





Comments







Does An Aftermarket Grille Really Increase Airflow?
I put a Saleen S281 grille to the test to answer that question.

Stock Suspension S197 Mustang With Square 305/30/19's
What you need to fit a proper size square tire setup.

How Limited Slip Diffs Make You Faster on Track
What you need to know about how they put power down and pros and cons.

Can Telemetry Explain Schumacher's Talent?
A comparison between Schumacher's and then team mate Herbert's data.






Cayman GT4 Track Review
The first Cayman with proper (911-challenging) power.

Is an EcoBoost Mustang any good on Track?
Two days at the track in a Mustang short 4 cylinders.

2016 BMW M4 DCT Track Review
It's quick (properly quick). But is it fun?

Can a stock Golf Diesel handle a Track Day?
Not your every day track beater.




🔥 Most Visited This Week

Michelin Pilot Super Sports vs Firestone Firehawk Indy 500 - Street Review

I've been a huge fan of Michelin PSS tires and exclusively bought them for the Mustang over the last four years. So how did I end up here? This year, I was hugely interested in trying an "R-comp" tire. I had my eyes set on Bridgestone Potenza RE-71R's for two simple reasons: price and reputation. Although not a true "R-comp" tire on paper, it performs like one by the account of every single test and review I've read (down to wear rates...). They seem like they're easily the most affordable (from a big brand) R-comp tire and combine that with a reputation for having tons of grip, it was an easy top contender. I had my concerns, though. For one, I'm told and have read that they are an autox tire, not really designed for high speed, pressure, and temps associated with open track. For another, the Mustang is a heavy car (as far as track cars are concerned) being roughly 3,800 lb. (including driver), which will amplify the unwanted open track loads.…

Stock Suspension S197 Mustang With Square 305/30/19's

If you've had any doubts about whether or not they will fit, fear not! You absolutely can run square 305/30/19's. I had a lot of doubts before pulling the trigger, even more so when the wheels where on the car. The tires do poke out a bit and I figured rubbing is all but guaranteed at full compression but I couldn't be happier I trusted APEX and those on here who have run it.

Here's what you need:

1. Camber plates: I have MM C/C plates and they are maxed out at -2.3 deg with the stock struts. I have been running them for years with many track days without issue.

2. 1"/25 mm spacer: I have Motorsport-tech 1" spacers and they look like high quality units. There is maybe a 1/4 inch clearance in the back so you can't go any narrower than 25 mm. http://www.motorsport-tech.com/adaptec/car/ford_s and you want Design 2.


3. Elongated studs: your best bet is to get the FPP hubs with elongated studs instead of reusing the old one. Bearings are consumables anyway so…

Everything You Need to Know about the $60k Mid-engine C8 Corvette

By now, you've probably heard one of the most incredible things about the new Corvette. It isn't the mid-engine layout. It's actually the price. It will start just under $60,000 USD (and under $70,000 CAD according to GM Canada Media website). Of course, that number alone means nothing if you aren't getting something special. So the question is: what are you actually getting for $60k? Let's dive right in.


The Drivetrain

Although most publications were anticipating the new Cadillac twin-turbo V8 called "Blackwing" until recently, I predicted last October that the base engine will likely be a revised version of the LT1 V8 in the current C7 Corvette "making anywhere between 480 and 500 hp." The C8 Corvette Stingray (at least until Z versions start coming out) will be powered by a revised 6.2 litre V8 named LT2. The engine will make 495 hp and 470 lb-ft. torque with the Performance Exhaust. The base version hp isn't announced but it will likely …

This Lanzante Porsche 930 is powered by a GP-winning F1 Engine

Whenever I hear of an outlandish 911 build, I always wonder what hardcore 911 would think. In my experience, they tend to love tradition and preserving the 911 legacy. This car breaks two of the holy trinity of classic 911's; rear engined, flat-six, and air-cooled. It is still rear engined but it uses a V6, water-cooled engine. But I can't imagine a single 911 fan being upset about this.

You see, this isn't just any water-cooled V6 engine. It is a Formula 1 twin-turbocharged 1.5 litre V6 out of a McLaren MP4/3 F1 car. Further preserving the Porsche-ness of this build, the engine was built by a partnership formed between Porsche and TAG to provide engines for McLaren F1 team. Porsche was responsible for the technical burden of design and engineering and TAG financed the effort and stuck its name on the engine as "TAG turbo" since McLaren didn't want Porsche's name on their F1 car.

Lanzante first revealed the car in October last year shortly after the annu…