Skip to main content
HOME   |   ABOUT   |   NEWS   |   TECH ARTICLES   |   AT THE TRACK   |   REVIEWS   |   VIDEOS   |   CONTACT ME

2016 Cadillac ATS-V Leaked




450 hp and 445 lb-ft out of a twin turbo V6, six speed manual and an e-locking differential, probably of the same variety used on the C7 Corvette Stingray. These details are just about enough to know about the 2016 Cadillac ATS-V to know that you want one. The ATS-V seems to have been leaked yesterday and it looks menacing. The fantastic looking ATS has been chiseled to produce a much more aggressive look that is distinctly Cadillac but the good news don't stop there.




More juicy bits include titanium connecting rods, two water-to-air intercoolers, titanium turbines for the turbos and an additional radiator dedicated to cooling the gearbox and diff. GM has been using Michelin tires on many high performance models and this is no exception as Pilot Super Sport tires will keep this car stuck to the road and suspension roll stiffness has been turned up 50%.




The car should weigh around 3,600 lb and while that isn't lightweight, it's right around what you would expect right now for a small, fast luxury coupe. The M3/M4 cars come a little under 3,600 lb but with the Cadillac's added power, the little additional weight should not be a problem. Judging by the Corvette's performance at Car and Driver's Lightning Lap 2014, this car will probably punch far above its weight its weight. I suspect that, at VIR during next year's Lightning Lap, the ATS-V should be at least as quick as the Camaro ZL1 which posted a lap time of 2:57.5, the same as an Audi R8 V10 Plus.




If I had one compliant, it would be the quad exhaust arrangement which looks a little too similar to the M-division BMW's. I like the look, but I don't like that it isn't unique. Other than that, the car looks great and sounds like it will drive even better. Hopefully, we get to find out more details at the LA Auto Show, which should also include the reveal of another very highly anticipated car. The performance model that has been teased by Ford which is expected to be the Mustang GT350.


Comments

Post a Comment







Does An Aftermarket Grille Really Increase Airflow?
I put a Saleen S281 grille to the test to answer that question.

Stock Suspension S197 Mustang With Square 305/30/19's
What you need to fit a proper size square tire setup.

How Limited Slip Diffs Make You Faster on Track
What you need to know about how they put power down and pros and cons.

Can Telemetry Explain Schumacher's Talent?
A comparison between Schumacher's and then team mate Herbert's data.






Cayman GT4 Track Review
The first Cayman with proper (911-challenging) power.

Is an EcoBoost Mustang any good on Track?
Two days at the track in a Mustang short 4 cylinders.

2016 BMW M4 DCT Track Review
It's quick (properly quick). But is it fun?

Can a stock Golf Diesel handle a Track Day?
Not your every day track beater.




🔥 Most Visited This Week

Michelin Pilot Super Sports vs Firestone Firehawk Indy 500 - Street Review

I've been a huge fan of Michelin PSS tires and exclusively bought them for the Mustang over the last four years. So how did I end up here? This year, I was hugely interested in trying an "R-comp" tire. I had my eyes set on Bridgestone Potenza RE-71R's for two simple reasons: price and reputation. Although not a true "R-comp" tire on paper, it performs like one by the account of every single test and review I've read (down to wear rates...). They seem like they're easily the most affordable (from a big brand) R-comp tire and combine that with a reputation for having tons of grip, it was an easy top contender. I had my concerns, though. For one, I'm told and have read that they are an autox tire, not really designed for high speed, pressure, and temps associated with open track. For another, the Mustang is a heavy car (as far as track cars are concerned) being roughly 3,800 lb. (including driver), which will amplify the unwanted open track loads.…

Stock Suspension S197 Mustang With Square 305/30/19's

If you've had any doubts about whether or not they will fit, fear not! You absolutely can run square 305/30/19's. I had a lot of doubts before pulling the trigger, even more so when the wheels where on the car. The tires do poke out a bit and I figured rubbing is all but guaranteed at full compression but I couldn't be happier I trusted APEX and those on here who have run it.

Here's what you need:

1. Camber plates: I have MM C/C plates and they are maxed out at -2.3 deg with the stock struts. I have been running them for years with many track days without issue.

2. 1"/25 mm spacer: I have Motorsport-tech 1" spacers and they look like high quality units. There is maybe a 1/4 inch clearance in the back so you can't go any narrower than 25 mm. http://www.motorsport-tech.com/adaptec/car/ford_s and you want Design 2.


3. Elongated studs: your best bet is to get the FPP hubs with elongated studs instead of reusing the old one. Bearings are consumables anyway so…

Koenigsegg Gamera: 4 Seats, 4WD, 3 Cylinders, and 1700 hp

Meet the Koenigsegg Gamera. This car brings so many firsts, not just to Koenigsegg, but also to the entire automotive industry. For Koenigsegg, it is the first car to have 4 seats, the first to have 3 cylinders and the first to have all wheel drive. Koenigsegg calls it the world's first mega-GT (gran touring) car, and I think they're right. For the world, it brings the first four seater, mid-engine, hyper car. Koenigsegg says it wants to bring the "exciting performance traits of a mid-engine two-seater megacar with the practicalities of a four-seater car with more luggage space" so the experience can be shared with "family and friends." Clearly, I need better friends...

With 1,700 hp on tap, you are sure to impress those lucky enough to be your family and friends if you own one of those. Of course, a three cylinder engine with 1,700 hp is likely to have all the driveability and flexibility of a farm tractor so Koenigsegg doesn't rely on it for all the …

2020 Mid Engine Corvette C8.R Race Car And Engine Specs Revealed

It's finally time to welcome the brand new 2020 mid-engine Corvette C8.R race car. I'd say this is the most hotly anticipated race car to debut since the current Ford GT, but Ford surprised the world with the GT so there wasn't a whole lot of anticipation. This may be the most hotly anticipated new race car ever in quite a while, much like its street going mid-engine sister.

It's the first clean sheet design in about 20 years, Chevy says, since the 1999 C5.R and will race for the first time ever at the 2020 Rolex 24 Hours of Daytona. Chevy says there is a deeper connection and technology transfer between the C8.R racing version and the road-going C8, and the highest percentage of shared parts of any Corvette generation before.


In fact, the C8.R utilizes the production chassis built right alongside the other chassis meant for street duty in the Bowling Green Assembly plant that builds the street version. As expected, there are some modifications to meet race requiremen…