Rams Eye The Track Guy

After writing for 7+ years , it is finally time to start making videos. Don't worry, I won't stop writing, but will be bringing video content now, including track reviews, tech features, builds, and tips and insights on how to go faster and safer. This is a little preview of what you can expect to see. Make sure to head over to YouTube and subscribe so you don't miss any future videos! Follow Rams Eye The Track Guy on Facebook and Instagram! View this post on Instagram A post shared by Michael R (@ramseyethetrackguy) on May 21, 2019 at 5:17pm PDT

A couple of months ago, I posted about how the 2020 BMW M3 (code named G80) will bring more than 500 hp and AWD . At that point, I figured all hope was lost for a manual M3 or M4, despite an earlier report that BMW M is still committed to manuals . Thankfully, it looks like hope is fully restored or - better yet - replaced with full expectations of a manual, thanks to an interview by Car Magazine. If you were waiting for a 500+ hp AWD beast, fear not. It is still coming. But BMW M boss Markus Flasch just confirmed to Car Magazine that an entry level version for the purists will bring lower horsepower, a manual stick shift, and RWD. They are code named M3 Pure or M4 Pure internally and will pack "only" 454 hp. According to Car Magazine, this is because BMW does not have a manual gear box that can handle the full output, but I'm sure it also has something to do with hierarchy. It will still come with an electronic limited slip differential like the current M cars

BMW M2 equipped with an eLSD - BMW © A few weeks ago, I posted about traditional clutch-type limited slip diffs (LSD's) and how they work. You can read about those in the previous post: How Limited Slip Diffs Make You Faster on Track . But as you might know or have learned from reading the article, they aren't without their faults, which means engineers are always working to get around those limitations. You may not be surprised to learn that something like the Ferrari 488 GTB doesn't use a traditional limited slip diff, but it's not limited to super cars, far from it. Cars like the Golf GTI, the Civic Type R, various Mustangs, Corvettes, and BMW M cars, and even the Lexus RC F and GS F, all avoid a traditional limited slip diff in favour of one of these technologies. To keep things simple, I'll focus on two wheel drive vehicles. The vast (vast) majority of principles apply to all and 4 wheel drive vehicles, but there are some subtle differences that I'll

2012 Boss 302 on square 305/30/19 RE-71R's at AMP - Graham MacNeil © For better or for worse, I have heard and read so much about RE-71R's. Everyone swears by the grip but complains about the wear. Generally speaking, the pros are: 1. They grip as well or better than most R comps. 2. They don't wear as quickly as R comps if driven occasionally on the street. 3. They work better in the rain than R comps. The cons were limited to overheating quickly when used on track (being an autocross tire) and wearing too fast on heavy cars like mine. In the popular 200 TW category, they are faster than the popular Hankook RS-4's and BFGoodrich Rival S's according to published Tire Rack Tests. According to plenty of reviews, they are also faster than well established R comps like R888R's (which don't seem to work too well on heavy cars anyway) and the venerable NT01's. But I was still hesitant for a while until I talked to a tire tech support gentleman

If you've had any doubts about whether or not they will fit, fear not! You absolutely can run square 305/30/19's. I had a lot of doubts before pulling the trigger, even more so when the wheels where on the car. The tires do poke out a bit and I figured rubbing is all but guaranteed at full compression but I couldn't be happier I trusted APEX and those on here who have run it. Here's what you need: 1. Camber plates: I have MM C/C plates and they are maxed out at -2.3 deg with the stock struts. I have been running them for years with many track days without issue. 2. 1"/25 mm spacer: I have Motorsport-tech 1" spacers and they look like high quality units. There is maybe a 1/4 inch clearance in the back so you can't go any narrower than 25 mm. http://www.motorsport-tech.com/adaptec/car/ford_s and you want Design 2. Motorsport Tech 1" Mustang Hub-centric Spacers 3. Elongated studs: your best bet is to get the FPP hubs with elongated studs